Warning! This Machine will not work properly without the . 

FINANCING and RETURNS are not available for pre-owned units

Important Resources and downloads:

• Visit this machine in person: 
• Download the 
• Download the  software
• NOTE: Does not include  Software
• Replacement: , , , 

Condition:

Functional: This machine has been previously owned, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of cosmetic wear and/or structural damage, but is fully operational and functions 100% as intended.

Good: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended.

Great: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device has minimal signs of use but is fully operational and functions 100% as intended.

PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine.

OMTech Certified:

This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance.

Used Machines Are Sold As It Is:

Used laser machines are sold in their current state and condition. All sales for pre-owned units are final, machines will not be eligible for returns/refunds.

Photo Guide:

View condition examples of previous Pre-Owned models: 

Safe Shipping:

This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery.

Specs:

• Laser Source: Raycus

• Rated Power: 50W
• Est. Service Life: 100,000 hr.
• Laser Wavelength: 1064 nm
• Laser Frequency: 20-100 kHz
• Engraving Area: 35 x 51 in. (900x1300 mm)
• Front Pass-Through Size: 53.1x3.5 in. (1350x90 mm)
• Rear Pass-Through Size: 53.1x1.5 in. (1350x40 mm)
• Side Pass-Through Size: 37.4x0.7 in. (950x20 mm)
• Max. Marking Speed: 19.7 ips (500 mm/sec.)
• Max. Marking Depth: 0.04 in. (1 mm)
• Operating Software: RDWorks 8 for Windows 7, 8, or 10 (32/64 bit)
• Supported Image Formats: .ai, .bmp, .dx, .dxf, .gif, .jpg, .plt, .png, .tga, .tif
• Data Transmission: USB Cable, Ethernet Cable, USB Flash Drive
• Certifications: CE, FDA
• Dimensions: 70.8 x 51.2 x 37.8 in. (180x130x96 cm)
• Net Weight: 660 lb. (300 kg)

Cutting Edge Features:

• 50W SOLID-STATE LASER: This 50W fiber laser marking machine by OMTech will allow you to bring your ideas to life with greater speed, precision, and versatility than ever before; with an MTTF over 100,000 hours, this durable laser cuts metal sheets up to 0.04 inches thick to recreate intricate designs perfectly
• MOTORIZED 35x51 WORKBED: The spacious 35x51 inch workbed provides 6 square feet of room to fit almost any project and four-way 53.1x3.5 at the front, 53.1x1.5 at the back, and 37.4x0.7 on either side pass-through doors open up even greater possibilities; everything adjusts automatically up and down at the touch of a button, eliminating tedious manual adjustment and speeding production
• TOUCHSCREEN RUIDA CONTROLLER: The Ruida touchscreen panel offers precise and easy control and works with most third-party graphic software, easily receiving files via Ethernet or USB; the workspace grid of M6 holes holds your material in just the right spot every time as the laser works its magic at speeds up to 19.7 ips (500 mm/s)
• SAFE & EASY OPERATION: This laser cutting and engraving tool comes bundled with RDWorks software compatible with 32 and 64-bit editions of Windows 7, 8, and 10 and a wide range of image formats (see below); the transparent viewing window allows you to observe your engraver in action; and a built-in air assist quickly blows away smoke, dust, and sparks
• SUPERIOR SUPPORT & SERVICE: From garage artists to backyard businesses to professional jewelers and workshops, the OMTech community continues to grow thanks to our passionate dedication to making quality engraving available to all; order your own fiber engraver today and enjoy fast US-based shipping, a strong 2 year warranty, and our ever helpful customer service and tech support

Package Includes:

• 1 x 50W Fiber Laser Engraver

• 1 x Ethernet Cable
• 1 x USB Cable
• 1 x USB Flash Drive with Software
• 1 x WIFI Route
• 1 x Power Cord
• 1 x Instructions

Warranty:

• Great: 1-year warranty on machine parts and hardware, 3-month warranty on laser tubes and power supplies
• Good: 6-month warranty on machine parts and hardware, 3-month warranty on laser tubes and power supplies
• Functional: 3-month warranty on machine parts and hardware, 1-month warranty on laser tubes and power supplies

Certifications:

• FDA Compliant
• CE Certification
• ISO9001 Quality Certification
• One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California